Whalen's Speed Project 120X3

Whalen Speed | Project Can-Am 120X3 EP8

Finally back with another update on our 120 Model Can-Am X3. This video just touches base on some of the things we've been doing here with the machine. John still has a lot going on and we still have a lot to do yet. Enjoy.

Whalen Speed | Project Can-Am 120X3 EP7.5: SXS Blog Race Day

Little racing and chatting about the SXS Blog race day. We dropped the Motec M130 package in the car on Thursday, tuned it on Friday, and showed up pretty well on Saturday. The Black XDS next to us is running our WS240X package on stock ecu. Our XRC (still with the winch installed) was running 27-29 PSI and Chris' XDS(street legal) was at 30 PSI. Both running KWI clutch components. Both on E85, both full weight.

Look at the roost difference between big horns and paddles!! We will for sure come more prepared and with better equipment to try to make it a little closer for you guys! Nothing better testing our stuff against other competitors as well as our own products. It amazing to see our two machines as close to each other as they were!

Whalen Speed | Project Can-Am 120X3 EP7: WSRD Intake Test & A Visit From Bak40 Motorsports

For the past few weeks, we have been trying to get a lot done to our machine. Trying to get as much on video as possible. We wanted to make sure our intake system worked. With great results with it we continued the video with preparation for the SXSBlogs track/fun day. Hope we didn't jump around to much since we had a couple of crazy weeks here at the shop. Please comment or reach out to us anyway you please if you have any questions.

Whalen Speed | Project Can-Am 120X3 EP6: WS180 TEST & BIG Bolt-On Turbo

We got a chance to hit up our property this past weekend. It unfortunately ended a little too soon due a storm that rolled in on us. We didn't get all the footage we wanted but we got enough to throw something together. After that, we headed back into the shop to install our new FPX3 Green Turbocharger. We swapped everything over to the new set up. Sorry for not showing any of the install itself. But, it was pretty quick, it was a complete bolt on system with some swapping on the stock parts! MORE TO FOLLOW!

Whalen Speed | Project Can-Am 120X3 EP5: WS170 + REV-X and Race-GAS Additive Dyno Test

We took our weekend and did some oil and fuel additive dyno testing. We first needed confirmation on our WS170 tune, so we knocked that out in the first back-to-back dyno pulls. We used those numbers to now base any gains from the oil and fuel additives. So, we then just added the REV-X engine oil additive. At the we did a few heat cycles and then some power pulls, we ended up reaching back to that test at the END of the video. Then the other additive was the fuel octane booster, Race-GAS. We had the same tank of fuel, 91 non ethanol. But, sit back and enjoy. We had A LOT of content in this video. PLEASE comment if there is any questions.

Whalen Speed | Project Can-Am 120X3 EP4: Street/Road Test Hits 0-60MPH Timed Runs

We changed a bit up this episode and did some street testing. We had a chance to test 0-50pmh ET times with our WS150 package and 0-50mph ET times with our WS160 package. Then, we decided to through our WS170 kit on our machine as well and do some 0-60mph. We did end up getting some data to where we changed a the clutching. We, again, hope this is all informational and somewhat entertaining. We have yet still more dyno tuning and plenty of more power for squeeze our of this! Hope you guys follow along!

Whalen Speed | Project Can-Am 120X3 EP3: Turning Up the Boost/Clutch Tuning/Dyno Tuning

We went down the list here at the shop with what we wanted to test and dyno for this eposide. After some time getting the clutch testing for the non-intercooled tune, we turned up the power. We got great results with that and next was to knock out the intercooler install and get back to clutching the turning up the power. There was a lot of content that we had to go through and we hope you guys follow along. If there are any questions and confusion about anything, be sure to let us know!
After some time and we think we nailed the WS150 & WS160 clutching and tuning. We hope that what we bring to these videos are informational and give you guys some incite on what it takes to make kits work and reliable.

Whalen Speed | Project Can-Am 120X3 EP2: Entire Day Tuning and Clutching Our XRC

With entire day spent on tuning our XRC. We got great results with the tuning of the stock set up. With our gains, we now tackled some of the clutching. If there are any questions. Please let us know!

Whalen Speed | Project Can-Am 120X3 EP1: New WSRD Project/Pick Up And Explained

Here we are with our first episode of Project 120X3. We traveled to Zeigler Motorsports to pick up our new 2019 Can Am XRC turbo (120hp Model, non intercooled). Our goal of this video is to introduce our new purchase and to explain the plans of what WSRD has planned for the Can Am. Thanks and enjoy!