Tie Rods – Factory Style
These Tie Rods Fit Polaris RZR 1000 and Turbo
Specs on the Rods:
These are factory style ball and socket tie rods.
This listing is for a SET
Made in America
Lifetime Warranty on rod itself.
Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end)
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)
2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)